Description
LP7510A Stainless Steel kit Locosc
Cattle Squeeze Chute Scale kit For Priefert, Tarter, Rural King, Powder River, Digi-Star 153063
High QUALITY PARTS and ALL The Part You Need ! Silicone coated cables against URINE and low condens chemicals. Stainless Steel Water tight NEMA 4X rated junction Box with full rubber gasket. Build your own scale under your Cattle Squeeze Chute for a lot less than buying it with the chute. Includes All the parts you need to do the installation! (even the mounting threaded blocks you weld under the frame) Plus a very precise manual with illustrations of installation and what to watch out for during the install. Separate manuals even instructions if you need to adjust junction box for uneven weight distribution.
Included: (4) pcs. 5,000 lb capacity shear beam load cell with more than 20’ft of Silicone coated cable long enough that you will ever need for a chute. This could handle 10,000 lb of pressure on either side, entrance or exit. Electronic parts are environmentally sealed with 150% safe overload. (helps with shock load for bulls)
(4) swivel feet that will do 360 deg. swivel and bend so a bucking bull won’t break it
(1) Stainless Steel Water tight NEMA 4X junction box that we Pre-wire to indicator and One load cell to make sure you will see how to wire the rest of them. (1) Flat head screw driver for terminal box wiring and small adjustments.
(4) spacers for the load cells and bolts and Mounting blocks you weld under frame. (8) Flat washers, (8) spring washers, (4) threaded mounting blocks, (8) bolts, (4) load cell spacers ALL IN KIT !
(1) Digital weight indicator with quick disconnect Already pre-made with 20’ft cable. LP7510A Stainless Steel indicator comes with Ac adapter RS-232 port, indicator is Class III NTEP model AC adapter included 12VDC input you able to run from truck also with some extra part cable connector that is not included. indicator has Large LED over 1″ display for easy view. For animals use HOLD function built into the indicator. (most farmers don’t use it because the indicator is accurate enough with regular weighing function, but it is there for your convenience. Indicator will come Pre-set but for accurate weighing you should calibrate it.
(1) manual for calibration setup and Important part example of proper installation with drawing, as we did some installations of our own we kind a know the most common mistakes you can make so we put a drawing together to help you avoid these common mistakes.
Last install these Cattle Squeeze Chute on solid surface, Not in Mud or Gravel. Install it on level concrete or some solid surface, could be planks but make sure it is solid and level. Level the foot make sure they are not wobble, if they wobble adjust them make sure they are firm on the ground before calibration.
